x-kom hosting

HDD pojawia się i znika kiedy chce...

enes
utworzono
utworzono (edytowane)

WItam.

Posiadam dyski ssd oraz hdd.

Działały na ahci ale przełączenie na ide nie pomogło

Zdjęcie zrobione podczas bootowania IDE

[spoiler]gmh290.jpg[/spoiler]

Dysk pracuje ale windows7 go nie widzi wcale.

Na ubuntu bootowanym z pendrive można chwile go zobaczyć ale potem wyskakuje input/output error

Mam na nim "resztke" win 10 uszkodząną podczas przenosznia na ssd i zaczyna bootować i uruchamiać 10 z niego ale dalej nie wiem bo win 10 jest niekompletny i nie do naprawienia i po zakończeniu "kręcenia się" i włączenia menu z wyborem języka się zawiesza ale nie wiem czy to dysk.

 

Czasami po restarcie przyciskiem reset bios też go nie wykrywa lecz jeżeli się wyłączy i włączy całkowicie komputer to dysk się pokazuje.

 

Zamieniałem dyski miejscami (chodzi o miejsce na kablu zasilającym) wymieniałem kable sata oraz porty.

Może to być wina zasilacza "z czarnej listy"? będe go wymieniał bo i tak chce grafe wymienić ale musze najpierw znaleść odpowiedni model do 200 zł.

 

zaraz dodam jescze ss tego co wyskakuje z ubuntu

[spoiler]

i7l8sa.jpgz3yaws.jpg[/spoiler]

SS menedżera urządzeń

 

[Spoiler]

uzzpv9.jpg

[/spoiler]

 

 

#edit 13.09.15 godz. 14:10 ( :D)

Przed chwilą podczas pracy nagle włączył się dysk i zdążyłem HDTune zrobić ss zakładki health po czym znowu zniknął

[spoiler]1agya8.jpg[/spoiler]

 

Przez Ultimate Boot cd udało mi się jescze coś takiego zdobyć po czym znowu zniknoł

[spoiler]

 

smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ES.2
Device Model:     ST31000340NS
Serial Number:    9QJ6GL3K
LU WWN Device Id: 5 000c50 01a445a2e
Firmware Version: G005
User Capacity:    1,000,204,886,016 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Sep 13 14:20:11 2015 CEST

==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/207963en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  625) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 219) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x103d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   073   053   044    Pre-fail  Always       -       188924794
  3 Spin_Up_Time            0x0003   098   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1407
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       19
  7 Seek_Error_Rate         0x000f   057   057   030    Pre-fail  Always       -       8977712954785
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20737
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       1
 12 Power_Cycle_Count       0x0032   099   037   020    Old_age   Always       -       1326
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       642
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -       4295360591
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   047   045    Old_age   Always       -       39 (Min/Max 39/40)
194 Temperature_Celsius     0x0022   039   053   000    Old_age   Always       -       39 (0 16 0 0 0)
195 Hardware_ECC_Recovered  0x001a   046   036   000    Old_age   Always       -       188924794
197 Current_Pending_Sector  0x0012   001   001   000    Old_age   Always       -       2028
198 Offline_Uncorrectable   0x0010   001   001   000    Old_age   Offline      -       2028
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       2

SMART Error Log Version: 1
ATA Error Count: 23850 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 23850 occurred at disk power-on lifetime: 20736 hours (864 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 00 00      00:00:34.658  IDENTIFY DEVICE
  ff 00 00 00 00 00 00 00      00:00:34.519  [VENDOR SPECIFIC]
  00 00 00 00 00 00 00 04      00:00:34.519  NOP [Abort queued commands]
  ff 00 00 00 00 00 00 00      00:00:34.411  [VENDOR SPECIFIC]
  00 00 00 00 00 00 00 ff      00:00:34.410  NOP [Abort queued commands]

Error 23849 occurred at disk power-on lifetime: 20736 hours (864 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 00 00      00:00:34.409  IDENTIFY DEVICE
  ff 00 00 00 00 00 00 00      00:00:34.270  [VENDOR SPECIFIC]
  00 00 00 00 00 00 00 04      00:00:34.269  NOP [Abort queued commands]
  ff 00 00 00 00 00 00 00      00:00:34.161  [VENDOR SPECIFIC]
  00 00 00 00 00 00 00 ff      00:00:34.161  NOP [Abort queued commands]

Error 23848 occurred at disk power-on lifetime: 20736 hours (864 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 00 00      00:00:34.159  IDENTIFY DEVICE
  ff 00 00 00 00 00 00 00      00:00:34.020  [VENDOR SPECIFIC]
  00 00 00 00 00 00 00 04      00:00:34.020  NOP [Abort queued commands]
  ff 00 00 00 00 00 00 00      00:00:33.910  [VENDOR SPECIFIC]
  00 00 00 00 00 00 00 ff      00:00:33.910  NOP [Abort queued commands]

Error 23847 occurred at disk power-on lifetime: 20736 hours (864 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 40  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  2f 00 01 10 00 00 00 00      00:00:33.775  READ LOG EXT
  60 00 08 e8 07 60 40 00      00:00:29.045  READ FPDMA QUEUED
  61 00 08 18 08 5e 40 00      00:00:29.043  WRITE FPDMA QUEUED
  60 00 08 f8 07 5e 40 00      00:00:29.042  READ FPDMA QUEUED
  60 00 08 f0 07 5e 40 00      00:00:29.031  READ FPDMA QUEUED

Error 23846 occurred at disk power-on lifetime: 20736 hours (864 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 04 9d 00 32 40  Device Fault; Error: ABRT at LBA = 0x0032009d = 3276957

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 e8 07 60 40 00      00:00:29.045  READ FPDMA QUEUED
  61 00 08 18 08 5e 40 00      00:00:29.043  WRITE FPDMA QUEUED
  60 00 08 f8 07 5e 40 00      00:00:29.042  READ FPDMA QUEUED
  60 00 08 f0 07 5e 40 00      00:00:29.031  READ FPDMA QUEUED
  60 00 08 88 08 00 40 00      00:00:29.031  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short captive       Completed without error       00%     11820         -
# 2  Short captive       Completed without error       00%     11817         -
# 3  Short captive       Completed without error       00%     11817         -
# 4  Short offline       Completed without error       00%     11777         -
# 5  Short offline       Completed without error       00%     11777         -
# 6  Short offline       Completed without error       00%      9365         -
# 7  Short offline       Completed without error       00%      6488         -
# 8  Short offline       Completed without error       00%      6441         -
# 9  Short offline       Completed without error       00%      6440         -
#10  Short offline       Completed without error       00%         5         -
#11  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[/spoiler]

maxsp2
komentarz
komentarz

Dysk na gwarancji ??

 

Jak tak to go odsyłaj częsta przypadłość segate.

 

Kiedyś tarkoczące głowiece a teraz problemy z stabilna pracą.

Wciąż szukasz rozwiązania problemu? Napisz teraz na forum!

Możesz zadać pytanie bez konieczności rejestracji - wystarczy, że wypełnisz formularz.

×
×
  • Dodaj nową pozycję...

Powiadomienie o plikach cookie

Strona wykorzystuje pliki cookies w celu prawidłowego świadczenia usług i wygody użytkowników. Warunki przechowywania i dostępu do plików cookies możesz zmienić w ustawieniach przeglądarki.